BLACKFIRE Wet Diamond All Finish Paint Protection is a paint-safe, water-based paint sealant that creates an extremely slick finish and incredible depth. Wet Diamond All Finish Paint Protection uses a revolutionary, crystal polymer recently released by Wacher- Chemie, Munich, Germany. This polymer refracts light, similar to a diamond, to create a vibrant, high-energy, super slippery, head-turning finish. It can be used by itself as the final sealant or as the foundation of BLACKFIRE's signature Wet-Ice over Fire shine.
BLACKFIRE Wet Diamond All Finish Paint Protection is state of the art paint protection! It is a sophisticated oil-in-water emulsion safe for all finishes, with or without a clear coat. This emulsion contains a small amount of a very refined mineral spirit in a water base. Multiple coats can be layered to deepen the gloss without drying or weakening the paint.
BLACKFIRE Wet Diamond All Finish Paint Protection can be applied by hand or dual-action, machine polisher. It applies easily and buffs off uniformly even in climates of high heat and high humidity. You simply walk around your car wiping on and buffing off as you go. So simple.
Wet Diamond s incredible shine is resistant to detergent washings and ultraviolet radiation. This keeps your car s finish protected month after month and wash after wash.
Hand Application Tips:
Always use on a cool surface out of direct sunlight. Apply a Quarter size amount of product on a dry applicator pad and wipe on the surface using small circular motions. Allow Wet Diamond All Finish Paint Protection to dry before buffing. Buff haze with a clean Microfiber Buffing Cloth.
Machine Application Tips:
Apply BLACKFIRE Wet Diamond All Finish Paint Protection using a finishing pad or wax pad on a dual action polisher, such as the Porter Cable 7424XP. Work on a small area, 24 to 36 inches square, out of direct sunlight. Apply two 6 to 8 inch lines of All Finish Paint Protection directly to the surface. With the machine off, spread the sealant over the surface using the dry foam pad. This coats the foam pad and the paint with sealant. (I prefer to apply this sealant with a dry pad, without using any pad lubricant.) Place the pad on the paint and turn the machine on. Set the speed dial on the polisher between 3-1/2 and 4. Work the pad over the surface in a back-and-forth motion and then an up-and-down motion. Apply until the sealant starts to dry. Cover one section of the vehicle at a time (i.e. the hood, a door, fender, etc.) Allow a haze to form. Hand buff to a brilliant shine with a Cobra Microfiber Towel.
Apply BLACKFIRE Wet Diamond All Finish Paint Protection with a foam finishing pad.
Wet Diamond All Finish Paint Protection enhances reflections on all types of paint.
Optional top coat for show vehicles or just showing off:
For ultimate depth and wetness, apply one coat of BLACKFIRE Wet Diamond All Finish Paint Protection and allow to cure for eight hours. Top with two coats of BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax. The resulting shine is wetness over energy, a Wet- Ice over Fire Shine!
The use of this paste wax on top of Wet Diamond All Finish Paint Protection is not required for a great, long-lasting shine. We mention it as an option for perfectionists or enthusiasts with show vehicles desiring the ultimate in depth and wetness.
Wet Diamond All Finish Paint Protection is VOC compliant in all 50 states. Wet Diamond All Finish Paint Protection is a pure sealant without any cleaning power. For best results, older vehicles should be pre-cleaned with BLACKFIRE Gloss Enhancing Polish or Scratch Resistant Clear Finishing Polish before first time application.